Lonsdor K518ISE Program BMW CAS2 528i Remote Key

Lonsdor K518ISE key programmer has successfully programmed a remote key on a BMW 528i CAS2 immobilizer system via OBD2.

 

Procedure:

Connect K518 host with vehicle via OBD diagnostic socket

Turn on K518 key programmer

lonsdor-k518ise-bmw-528i-1

Insert working key and press Start button

Select Immobilizer->BMW->Immobilizer->CAS2/CAS3->Program key

lonsdor-k518ise-bmw-528i-2

lonsdor-k518ise-bmw-528i-3

lonsdor-k518ise-bmw-528i-4

lonsdor-k518ise-bmw-528i-5

lonsdor-k518ise-bmw-528i-6

Press OK to continue

Press Start button once

lonsdor-k518ise-bmw-528i-7

Lonsdor k518 will read BMW CAS and remote key information

lonsdor-k518ise-bmw-528i-8

lonsdor-k518ise-bmw-528i-9

Remove key from ignition switch

For smart key, take it outside the car

lonsdor-k518ise-bmw-528i-10

Reading key information

Select Key Position 4 and click on OBD Generation

lonsdor-k518ise-bmw-528i-11

If the key is an original key, please pre-process first, if the key has been programmed but failed, please do key unlocking and CAS key data backup fisrt

lonsdor-k518ise-bmw-528i-12

Select key type: Remote key

lonsdor-k518ise-bmw-528i-13

Insert key to be programmed into Lonsdor K518ise key slot (to identify the key is legal and to pre-process key)

lonsdor-k518ise-bmw-528i-14

Detecting key

Key is legal

lonsdor-k518ise-bmw-528i-15

Insert key to be programmed into car slot

lonsdor-k518ise-bmw-528i-16

Writing key

If for remote or smart key, please complete following steps:

1.Take away the key from ignition switch

2.Insert key into ignition switch again

3.Press Start button

lonsdor-k518ise-bmw-528i-17

If vehicle can not start, or direction lock icon displays on the dash, please sync ELV or DME accordingly.

lonsdor-k518ise-bmw-528i-18

Program complete.

lonsdor-k518ise-bmw-528i-19

Test the remote control and start car.

http://www.obdii365.com/

error: www.obdii365.com