Tag Archive: Lonsdor K518 Volvo

Lonsdor K518 Volvo 2020 Failed to Initialize Target Chip Code-03 Solution

lonsdor-volvo-2020-failed-to-target-chip

Problem: I got a problem when programming Volvo 2020 smart key with Lonsdor k518ISE key programmer, an error occurred “failed to initialize target chip code-03” Lonsdor engineer solution: According to their experience, it’s usually caused by poor contact between Kprog adapter and cem module. You can clear the board and wire again. Wires should be shorter than 15 cm. Read also: How to use…
Read more

How to use Lonsdor K518 to Program Latest Volvo 2017- Smart Key?

lonsdor-k518ise-h0440c-program-lexus-ux250h-2019-lost-key-01(02)

Update time: May 14th, 2021, Lonsdor K518 Volvo CEM Data reading & smart key programming for XC40(2020-)  XC60(2018-)  XC90(2015-) S60(2020-)  S90(2017-) V60(2018-)     V90(2016-). Both add key and all keys lost. This function requires to open Volvo License (with free LYNK&CO software). Let’s take Volvo S90…
Read more

error: www.obdii365.com