How-to guide: Citroen Berlingo 2013 key programming by Keydiy remote using Lonsdor K518ISE key programmer via OBD.
Berlingo 2013 original remote 3-button
Keydiy universal remote 3-button
Step 1: Read Pin Code
Connect K518 host with vehicle via OBD socket
Select Immobilizer->Citroen-> Read pin code->Type 2
Turn ignition switch to ON position with original key
Read vehicle information: VIN, PSA number etc
Reading data and verifying PIN
Londsdor K518 read Berlingo 2013 pin code succeed
Step 2: Program key & remote
Select Immobilizer->Citroen->Select from vehicle ->Berlingo->Immobilizer->Type 3->Program key
Turn ignition to ON position
Communicating
Read vehicle information again
K518ISE requires 4-digit pin code to access
Turn ignition OFF and ON with original key within 15 seconds
1st key programming completed
Turn ignition off.
Insert new key (keydiy remote), turn ignition on
2nd key programming completed
Follow steps below to program remote control:
- Turn ignition off and remove key
- Insert a key and switch ignition on
- Press any button of the remote key for 10 sec and then release within 20 sec
- Switch ignition off and remove key
Program remote key success.
Test the remote and start vehicle.
Done.
