Lonsdor K518 Program VW Polo 2009 4th IMMO NEC+24C32 Remote Key

Here’s the demo guide on programming VW Polo year 2009 4th IMMO NEC+24C32 smart remote key with Lonsdor K518 key programmer by OBD.

 

Key information:

Original key: 3-button folding remote key

Frequency: 433MHz

Chip type: Special ID48 chip (TP23)

Device to program: Lonsdor K518ISE key programmer

 

Procedure:

Connect K518 host with vehicle via OBD diagnostic socket

Select Immobilizer->VAG->4th Immobilizer->Identify Immo type

lonsdor-k518-vw-polo-2

lonsdor-k518-vw-polo-3

lonsdor-k518-vw-polo-4

Lonsdor K518 identified immo type: 4th IMMO

lonsdor-k518-vw-polo-5

Select NEC 24C32

lonsdor-k518-vw-polo-7

Then Backup EEPROM and save data

lonsdor-k518-vw-polo-8

lonsdor-k518-vw-polo-9

Select Read Immobilizer data

lonsdor-k518-vw-polo-10

Lonsdor K518ISE read vehicle information: VIN, CS, PIN, key number and key ID

lonsdor-k518-vw-polo-11

Select Make Dealer Key

lonsdor-k518-vw-polo-12

Push card slot on K518 main unit from right direction

Insert new key to be programmed into card slot

lonsdor-k518-vw-polo-13

lonsdor-k518-vw-polo-14

Select Key Learn

lonsdor-k518-vw-polo-15

Enter key number to be programmed (keys that will start vehicle )

lonsdor-k518-vw-polo-16

Insert key and turn ignition on one by one

I.E, Dashboard shows 1-2 means 1 key has been learnt, 2-2 means 2 keys have done

lonsdor-k518-vw-polo-17

Program success.

lonsdor-k518-vw-polo-18

Test remote and star car.

www.obdii365.com

error: www.obdii365.com