How to use Lonsdor K518ISE to Program BMW F01 2010 CAS4 Key?

Vehicle Model: BMW F-series F01 year 2010

Remote type: PCF7953, 868MHz

Immo type: CAS4 1L16Y

Device to program: key renew tool, Lonsdor K518ise and VVDI Prog

lonsdor-k518ise-bmw-f01-1

 

Procedure:

Step 1: Renew key (if have new key go to Step 2)

Step 2: Read dump

Step 3: Add a new key

 

 

Step 1: Renew used key 

by Tango or MK3 programmers

lonsdor-k518ise-bmw-f01-3

lonsdor-k518ise-bmw-f01-4

lonsdor-k518ise-bmw-f01-5

Step 2: Read CAS4 data

Remove CAS4 module

lonsdor-k518ise-bmw-f01-6

Follow vvdi prog wiring diagram to connect CAS and programmer

lonsdor-k518ise-bmw-f01-7

lonsdor-k518ise-bmw-f01-8

Read CAS4 1L16Y data and save dump.

 

Step 3: Program key with Lonsdor K518ISE

In K518, select Immobilizer->BMW->Select from type->CAS4/CAS4+ ->Make ignition key

lonsdor-k518ise-bmw-f01-10

Copy and paste the CAS4 EEPROM data to Lonsdor “customfile” folder

lonsdor-k518ise-bmw-f01-11

Upload EEPROM dump

lonsdor-k518ise-bmw-f01-12

Select a key position to add key

lonsdor-k518ise-bmw-f01-13

Insert new key to be generated into K518 card slot

lonsdor-k518ise-bmw-f01-14

Follow K518ise instructions to generate ignition key

1.Take all other keys out of car except the new key

2.Close newly generated key to car induction coil

3.Press Start button and wait for 15 sec (remove key when dash turns on)

4.Check all function of the new key

lonsdor-k518ise-bmw-f01-15

Test the new key

Remote detect and can start engine.

lonsdor-k518ise-bmw-f01-16

Done.

Lonsdor K518ISE Program BMW F01 CAS4 2010 Remote Key Success