How to program remote key on a SsangYong Kyron 2014 using Lonsdor K518ISE key programmer.
Step 1: Program key
Connect K518 host with vehicle via OBD
Select Immobilizer->SsangYong->Select from Type->Immobilizer->Type 2->Program key
(If don’t know which type to choose, try one by one. When select Type 1, it gave communication failed error. Type2 works)
Turn ignition switch to ON position with original key
Program complete. Program next key
Replace new key and turn on ignition
Program 2nd key success
Both keys can start car
Step 2: Program remote with Lonsdor k518
Select SsangYong->Select from Type->Remote->Type 1->Program remote
Turn ignition off and remove key
Press and hold unlock/panic button of the remote for 2 secs, then release it
Program remote success
Remote control works!